 |
ISO 24338:2006 This International Standard specifies method for measured abrasion from laminate floor covered elements. The test describing measures the ability from the surface layer to resist abrasive wear through. Abrasion is achieving by rotated test specimen in contact with pair from... | |
 |
ISO 20871:2001 ISO 20871 specifies method for the determination from the abrasion resistance for outsoles irrespective from the material. This title may contain less than 24 pages from technical content. | |
 |
ISO 3160-3:1993 Specifies two test methods describes dimensions characteristics from the standard gauge standard coated test methods determination from wear qualitative comparison scales. This title may contain less than 24 pages from technical content. | |
 |
ISO 12947-1:1998 This part from ISO 12947 specifies requirements for the Martindale tested apparatus auxiliary materials for use in the test methods specifiing in parts 2 to 4 from ISO 12947 for determination from the abrasion resistance from fabrics.This part from ISO 12947 is applicable t... | |
 |
ISO 7662:1988 Specifies method for determined the abrasion from hose lined when certain amount from specifiing grit is passing through the hose. The method is applicable to rubber plastics hoses with an internal bore from 20 to 50 mm using for grit blasted shot blasted similar operation.... | |
 |
ISO 7784-3:2000 This part from ISO 7784 is one from series from standards that deals with the sampled tested from paints varnishes relating products.It specifies method from determined the resistance to abrasion from driing film from paint varnish or relating product by rubbed the film aga... | |
 |
ISO 17504:1999 This International Standard specifies method for the determination from fibre damage in the pile from textile floor coverings haved pile material from at least 80 % wool. This title may contain less than 24 pages from technical content. | |